Liên hệ

Professional coaxial two-way, full range, 4-inch ceiling mount loudspeaker system.

Perfectly suited for:

→  Corporate training rooms, ballrooms
→  Convention centers, exhibition centres
→  Houses of worship
→  Malls, airports, nightclubs, bars, restaurants
→  Auditoriums, museums

The IXP-4 is an in-ceiling loudspeaker delivering great sound performance. It features a 4” woofer + 0.75” tweeter with a conical horn. It uses a high quality 100V / 70V Line transformer that offers a selection of 30/15/7.5W ( 3.75W @ 70V) delivered to the louspeaker system using high impedance lines or 8Ω bypass.

The baffle and bezel are constructed from white ABS, the rear enclosure made in steel with black finish and adds damping material, providing an optimum internal volume for extended low-frequency performance together with the 2 bass ports situated on the front.

A rear cover, with provision for a junction box fitting provides access to a 4 pin terminal euroblock with loop-through for an easy power connection, also included is a point for safety steel wire and a cable glamp press ensuring the connection.

The frameless grill has a discrete design offering the possibility to paint easily if required. Thanks to the 6 neodymium points the grill can be removed without the need of any tools allowing the user to easily access the front wattage selector switch enabling quick adjustment of 70V/100V tap levels.



 4” 100mm polypropylene cone
Frequency Range  90 – 20.000 Hz
Rated Power
 30W (8 Ω) 120W Peak
Transformer Taps 100V 30 / 15 / 7.5 / 3.75W
70V 30 / 15 / 7.5 / 3.75 / 1.9W
Low Impedance 8Ω
 8Ω 102dB

100V / 70V 102dB

Sensitivity  87 dB 1W / 1m @ Zn average 400 Hz to 8KHz
Nominal Impedance
8 Ω
Nominal Coverage 100º Conical Dispersion
Recommended Signal processing
 100 Hz, at 24 dB per octave high pass filter
Crossover Frequency 5500 Hz 12dB/octave HP/LP filter
Input connection
4 poles Euroblock connector with loop-through
Enclosure material Baffle ABS, backcan steel black finish
Powder coated steel, white finish, paintable
Controls Front-face wattage / low impedance selector switch
Mounting / Rigging provisions
4 Rotating Mounting tabs (dog ears)
Dimensions H x Diameter 188 mm x 204.5 mm (7.4 in x 8 in)
Cut out size
168 mm (6.6 in)
Net weight 2.6 Kg (5.7 lbs)