GTX-Series-20KGTX-Series-20K

GTX-5K

Liên hệ

The GTX Series are 4-channel, extremely high power level amplifiers designed to withstand the rough requirements of the touring market.

With outstanding, high efficiency, these amplifiers have been equipped with a quality FIR-DSP with high performance 96kHz DSP processing and a large IPS display with a touch panel user interface.

Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired.

Optional Dante Networking (AES67) and AES3 Digital inputs are also available.

Recommend:

  • Multipurpose hall, conference room
  • Church
  • Background music square
  • Lounge Bar, Pub, Disco
  • Stateroom, restaurant for wedding reception

Features

Overall:

  • High performance 96kHz/24 bits AD/DA converters
  • 64 bit double-precision 96kHz DSP process
  • 0.85 ms minimum process latency time
  • Custom FIR process up to 1000 taps
  • Dante and AES3 input versions

Input Section (x4):

  • Gain, Mute and Phase inversion
  • Delay: in In A: 333ms (114m), In B/C/D: 90ms (31m)
  • Input EQ: 16 filters (Param., Shelving, LP, HP, BP, SB, AP)

Output Section (x4):

  • Crossover Filters: FIR and IIR (up to 48dB/oct, Butterw./LR/Bessel)
  • Output Delay: 0 to 31 meters (90ms) per channel
  • Output IIR EQ: 12 filters per channel (Param., Shel, LP, HP, BP, SB, AP)
  • Output FIR EQ: 20 filters per channel (Parametric, Shelving, LP, HP, BP, SB, AP), or Custom. Up to 1000 taps
  • RMS and Peak limiter per channel

Communications:

  • Two ports Ethernet switch for daisy chain connection
  • UBS 2.0 Type B port

Miscellaneous:

  • 100 Manufacturer system preset memories library
  • 20 User preset memories library
  • 20 User snapshot memories library
  • Manufacturer/User passwords
  • User control groups for virtual Equalization, Gain and Delay
  • Zones definition for library management and alerts information
  • Smaart® analysis software integration

Specifications

 

GTX-5K

GTX-10K

GTX-14K

GTX-20K

 Output power
 @ 2 Ohms  4 x 1250 W / 1 x 1250W  4 x 2500 W / 1 x 2500W  4 x 3500 W / 1 x 3500W  4 x 5000 W / 1 x 5000W
 @ 4 Ohms  4 x 1250 W / 1 x 2500W  4 x 2500 W / 1 x 2500 W  4 x 3500 W / 1 x 3750W  4 x 5000 W / 1 x 6000W
 @ 8 Ohms  4 x 1250 W / 1 x 1250W  4 x 1250 W / 1 x 1300 W  4 x 1800 W / 1 x 1900W  4 x 2500 W / 1 x 3000W
 Bridge @ 4 Ohms 2 x 2500 W 2 x 5000 W 2 x 7000 W 2 x 10000 W
 Bridge @ 8 Ohms 2 x 2500 W 2 x 5000 W 2 x 7000 W 2 x 10000 W
Hi-Z 100V 4 x 1250 / 1 x 2500 W 4 x 2500 / 1 x 2500 W 4 x 3500 / 1 x 4200 W 4 x 5000 / 1 x 5000 W
Hi-Z 70V 4 x 1250 / 1 x 2500 W 4 x 2500 / 1 x 2500 W 4 x 2950 / 1 x 2950 W 4 x 3500 / 1 x 3500 W
Max output voltage
150 V peak 150 V peak 189 V peak 235 V peak
Max output current
36 A peak 50 A peak 59 A peak 71 A peak
 Total Harmonic Distortion
 20Hz-20KHz <0.05%  <0.05%  <0.05%  <0.05%
 Crosstalk
 20Hz-1KHz  >70 dB  >70 dB  >70 dB  >70 dB
 Voltage Gain
 26 dB to 44 dB  26 dB to 44 dB  26 dB to 44 dB  26 dB to 44 dB
 Signal to Noise Ratio
 20Hz-20KHz  111 dBA  111 dBA  113 dBA  115 dBA
 Required AC Mains
 Operating Voltage (50Hz-60Hz)  90V -265V AC  90V -265V AC  90V -265V AC  90V -265V AC
 1/8 Rated Power (230V, @4 Ohm)  3.7 A  7.3 A  10 A  14 A
 Dimmensions
 W x H x D (mm)  483 x 88.9 x 355  483 x 88.9 x 355  483 x 88.9 x 355  483 x 88.9 x 355
 W x H x D (inches)  19 x 3.5 x 13.9  19 x 3.5 x 13.9  19 x 3.5 x 13.9  19 x 3.5 x 13.9
 Weight
 Net  7 Kg / 15.4 lbs  7 Kg / 15.4 lbs  7.5 Kg / 16.5 lbs  7.5 Kg / 16.5 lbs
 Protections
 Soft-start, Turn-on Turn-off transients, Multing at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™ and PCM™